How to remove fence post concrete?
Breaking out a concrete fence post footing means cutting it into liftable sections first — a sledge on an uncut slab mostly bounces. Saw-cut the perimeter, then break from an edge inward. Dry cutting generates respirable crystalline silica, regulated by OSHA at a 50 µg/m³ PEL, so use water or a HEPA-equipped saw.
- Typical thickness
- a hole one-third of the post height and three times the post widthfence post
- Typical strength
- 3ASTM C39 at 28 days
- Typical strength
- 3,000–4,000 psi21–28 MPa residential
- Test age
- 28 daysASTM C39
Short version
Does the answer change by state?
People search this question with a state attached — concrete among them — and the underlying material behaves the same everywhere. What changes is exposure and jurisdiction: freeze-thaw cycles decide whether air entrainment is required, deicing salt raises the exposure class, and frost depth, permits and the adopted code edition are all set locally.
Requirements are set by your local building department, not by any national table. See the state pages for cost bands, exposure classes and the authority that governs your address.
Common mistakes
- Skipping the cure — concrete hardens by hydration, and drying it out early costs strength permanently
- Ignoring exposure class — freeze-thaw and deicing salt require air entrainment under ACI 318
- Treating a jurisdiction-specific requirement as universal — frost depth, permits and code editions are set locally
Also asked as
- how to remove concrete from fence post
- how to remove a fence post in concrete
- how to remove fence posts in concrete
- how to remove concrete fence posts
- how to remove fence post with concrete
- how to remove fence posts from concrete
- how to remove a fence post from concrete
Sources (4)
- NRMCA — Concrete in Practice series (accessed Mon Aug 17 2026 00:00:00 GMT+0000 (Coordinated Universal Time))
- ASTM International — C39/C39M — Compressive Strength of Cylindrical Concrete Specimens (accessed Mon Aug 17 2026 00:00:00 GMT+0000 (Coordinated Universal Time))
- American Concrete Institute — ACI 318 — Building Code Requirements for Structural Concrete (accessed Mon Aug 17 2026 00:00:00 GMT+0000 (Coordinated Universal Time))
- PCA — America's Cement Manufacturers — Cement and Concrete Basics (accessed Mon Aug 17 2026 00:00:00 GMT+0000 (Coordinated Universal Time))